DP300 IDEX: Troubleshooting
Fixes for common print and machine problems.
DraftThis article is being written by the Garuda3D engineering team. For help now, contact support.
Before you start
- Note the exact symptom and when it started.
- Take a photo or video of the problem.
- Check whether an error code is shown.
Extrusion and clogs
Content pending
Symptom → likely cause → fix, for extrusion and clogs issues on the DP300 IDEX.
Dual-nozzle offsets and alignment
Content pending
Symptom → likely cause → fix, for dual-nozzle offsets and alignment issues on the DP300 IDEX.
Bed adhesion and levelling
Content pending
Symptom → likely cause → fix, for bed adhesion and levelling issues on the DP300 IDEX.
Print quality
Content pending
Symptom → likely cause → fix, for print quality issues on the DP300 IDEX.
Motion and axes
Content pending
Symptom → likely cause → fix, for motion and axes issues on the DP300 IDEX.
Electrical and connectivity
Content pending
Symptom → likely cause → fix, for electrical and connectivity issues on the DP300 IDEX.
Still not solved?
Contact Garuda3D support with your machine model, a description of the problem and photos or video. Get support.
Found a mistake or something missing? Email the wiki team.